Curing compounds (continue)

Curing compounds

It is a strategy like the past one, since its capability is to keep the surface from drying out, forestalling the progression of mixing water, yet for this situation it is accomplished by splashing compounds that enter the pores of the concrete, making an impermeable surface film. to the steam of water. (πατητή τσιμεντοκονία)

The use of these compounds should be done when the outer layer of the concrete is still exceptionally damp, basically soaked, since it is important to stay away from that the fluids are retained and end up in the inside layers of the concrete.

There are likewise other curing frameworks utilized in the precast business, for example, steam curing or submersion, yet it isn't material to what we won't find nearby, so I won't go into them.

How long do you need to run the concrete curing?

This is an issue that relies a ton upon the area of the work, since concrete put in a moist region like Galicia, with ordinary downpour and a damp climate, won't be equivalent to a work in the Locale of Murcia, where there is not really and it downpours and the climate is immensely dry.

Assuming the climate is dry, it is exceptionally bright, high temperatures or solid breezes, the gamble of vanishing will be more noteworthy, so the curing of the concrete is clearly fundamental, however in any case its solidifying is quicker because of the temperature , so the time during which the curing should be kept up with is less.

However, in a cool climate, the solidifying velocity of the concrete is lower, so the time during which the substance response is occurring is longer, or at least, we really want to ensure the legitimate extent of water and cement for a longer time frame. , you need to remain longer with the curing.

When in doubt, it is viewed as that concrete should be restored until it has obtained 70% of its normal opposition. Indeed, OK, I realize that this can't be checkiness in the space is high and the te,mes we can express that if the stickiness in the space is high and the temperature isn't exceptionally high or extremely blustery, keeping up with curing no less than 2-3 days would be vital.

On the off chance that the dampness of the climate isn't exceptionally high, regardless of whether the temperatures are not extremely high or it isn't extremely blustery, continuing to remedy for something like 3-5 days is prudent. (πατητη τσιμεντοκονια)

In the most negative case, with low relative mugginess, intensity, wind or high daylight, keeping up with dampness for something like 5-7 days is fundamental.

The more the curing is finished, the more the nature of the concrete will be. Additionally, on the off chance that we go past curing days, literally nothing occurs, so my recommendation isn't to hold back on curing days, remaining with the base. It will constantly be better.

Consequences of not accurately curing concrete

The principal result of not curing the concrete is the deficiency of definite strength of the concrete, in light of the fact that as I have previously made sense of, if part of the water essential for the substance solidifying response to happen is lost, a piece of the cement remains unreacted and subsequently it isn't workable for it to totally solidify.

This by itself is an explanation that legitimizes without anyone else the execution of the curing, yet it isn't the one to focus on, since the sturdiness of the concrete is likewise impacted, or at least, in what the concrete will be in a couple of years. This is on the grounds that the porosity of the shallow layers increments, since the water that dissipates passes on its space to the air, leaving pores that in the long term favor the passage of the outside climate and hence the untimely corruption of the concrete.

What's more, in the momentary it can cause surface breaking of the mass, since it is on a superficial level where water is lost and consequently the mass will in general psychologist to change the volume lost by water. This shrinkage due to drying causes surface breaking that clearly influences the completion, yet in addition the nature of the concrete component and furthermore its strength. (μαθηματα τεννις)

Conclusions

Above all else is that assuming concrete curing is significant, it is modest and it adds quality to what is executed, why not make it happen?

In the event that it isn't executed, it will presumably not be observable temporarily, the people who execute it will rest calmly imagining that they have made an exceptional showing, yet the clients who experience the fixes that will most likely be important in the medium term because of the issue won't think something very similar. of professionalism of the people who executed his structure.

We should recall that a structure isn't intended to last 5 or 10 years, it is intended to endure no less than 50 looking great, so what has been executed must be intended to endure and I guarantee you that, in the event that it isn't executed accurately, over the long haul it will require activities that could be tried not to just by flood 3 or 4 days with water.

At last, subsequent to understanding this, what they will not do is silly individuals who would rather not go about their business appropriately, so, they are awful experts. Like this, with capital letters and striking. https://decotech.gr